Mingli Mu, Jun Cheng, Chengna Dai, Ning Liu, Zhigang Lei, Yanzhou Ding, Jianjiang Lu. Removal of gaseous acetic acid using ionic liquid [EMIM][BF4]. Green Energy&Environment, 2019, 4(2): 190-197. doi: 10.1016/j.gee.2019.01.004
Citation: Mingli Mu, Jun Cheng, Chengna Dai, Ning Liu, Zhigang Lei, Yanzhou Ding, Jianjiang Lu. Removal of gaseous acetic acid using ionic liquid [EMIM][BF4]. Green Energy&Environment, 2019, 4(2): 190-197. doi: 10.1016/j.gee.2019.01.004

Removal of gaseous acetic acid using ionic liquid [EMIM][BF4]

doi: 10.1016/j.gee.2019.01.004
  • This work proposed to use the ionic liquid [EMIM][BF4] as absorbent for the absorption of gaseous acetic acid. The feasibility of this technology was investigated from molecular level to industrial scale. The acetic acid absorption experiment was carried out using [EMIM][BF4], and the removal ratio of acetic acid in the gas product can achieve 88.6% at 20 °C under atmospheric pressure at the laboratory scale. Based on the experimental results, a reliable strict equilibrium phase model embedding the parameters of the UNIFAC model was established. On this basis, the conceptual process design and optimization of acetic acid removal by [EMIM][BF4] at an industrial scale was done, and the most suitable design and operation parameters were obtained. For a further step, the binding energy between [EMIM][BF4] and acetic acid was calculated to give some insights into the separation mechanism, and the results indicate that the interaction between acetic acid and IL is much stronger than that between nitrogen and IL. Moreover, hydrogen bond can be formed between the cation-acetic acid as well as the anion-acetic acid.

     

  • loading
  • [1]
    M.J.Salar-García, V.M.Ortiz-Martínez, F.J.Hernández-Fernández, et al. J. Hazard. Mater., 321 (2017),pp. 484-499
    [2]
    R.Atkinson Atmos. Environ., 34 (2000),pp. 2063-2101
    [3]
    A.Berenjian, N.Chan, H.J.Malmiri, et al. J. Biochem. Biotechnol., 8 (2012),pp. 220-229
    [4]
    L.Shi, C.Wang, C.Zou Eng. Fail. Anal., 36 (2014),pp. 372-378
    [5]
    M.Milota, P.Mosher, K.Li For. Prod. J., 57 (2007),pp. 73-77
    [6]
    S.Salvador, J.M.Commandré, Y.Kara Appl. Therm. Eng., 26 (2006),pp. 2355-2366
    [7]
    G.Quijano, A.Couvert, A.Amrane, et al. Chem. Eng. Sci., 66 (2011),pp. 2707-2712
    [8]
    J.Chen, G.Li, Z.He, et al. J. Hazard. Mater., 190 (2011),pp. 416-423
    [9]
    Sz.Modelski, A.Kołtuniewicz, A.Witek-Krowiak Chem. Eng. J., 168 (2011),pp. 1016-1023
    [10]
    D.J.D.Dina, A.R.Ntieche, J.N.Ndi, et al. Res. J. Chem. Sci., 2 (2012),pp. 42-49
    [11]
    H.Lv, Y.Sun, M.Zhang, et al. Energy Fuels, 26 (2012),pp. 7299-7307
    [12]
    S.C.Lee Sep. Purif. Technol., 118 (2013),pp. 540-546
    [13]
    K.Baruah, S.Hazarika J. Appl. Polym. Sci., 131 (2014),p. 40537
    [14]
    F.Heymes, P.Manno-Demoustier, F.Charbit, et al. Chem. Eng. J., 115 (2006),pp. 225-231
    [15]
    F.Heymes, P.M.Demoustier, F.Charbit, et al. Chem. Eng. Sci., 62 (2007),pp. 2576-2589
    [16]
    J.Cai, X.Cui, Y.Zhang, et al. J. Chem. Eng. Data, 56 (2011),pp. 282-287
    [17]
    P.Wasserscheid, W.Keim Angew. Chem. Int. Ed., 39 (2000),pp. 3772-3789
    [18]
    Z.Lei, C.Li, B.Chen Sep. Purif. Rev., 32 (2003),pp. 121-213
    [19]
    M.Gonzalez-Miquel, J.Palomar, F.Rodriguez J. Phys. Chem. B, 117 (2013),pp. 296-306
    [20]
    C.H.Li, K.X.Gao, Y.N.Meng, et al. J. Chem. Eng. Data, 60 (2015),pp. 1600-1607
    [21]
    W.Wang, X.Ma, S.Grimes, et al. Chem. Eng. J., 328 (2017),pp. 353-359
    [22]
    G.Yu, C.Dai, H.Gao, et al. Ind. Eng. Chem. Res., 57 (2018),pp. 12202-12214
    [23]
    C.Dai, X.Sui, Z.Lei J. Mol. Liq., 256 (2018),pp. 471-479
    [24]
    A.Fredenslund, R.L.Jones, J.M.Prausnitz AIChE J., 21 (1975),pp. 1086-1099
    [25]
    G.Yu, X.Sui, Z.Lei, et al. AIChE J., 69 (2019),pp. 479-482
    [26]
    Z.Lei, C.Dai, X.Liu, et al. Ind. Eng. Chem. Res., 51 (2012),pp. 12135-12144
    [27]
    Z.Lei, J.Zhang, Q.Li, et al. Ind. Eng. Chem. Res., 48 (2009),pp. 2697-2704
    [28]
    E.A.Macedo, U.Weidlich, J.Gmehling, et al. Ind. Eng. Chem. Process Des. Dev., 22 (1983),pp. 676-678
    [29]
    J.Gmehllng, P.Rasmussen, A.Fredenslund Ind. Eng. Chem. Process Des. Dev., 21 (1982),pp. 118-127
    [30]
    M.J.Frisch, G.W.Trucks, H.B.Schlegel, et al.
    [31]
    W.Kohn, L.J.Sham Phys. Rev., 140 (1965),pp. A1133-A1138
    [32]
    A.D.Becke J. Chem. Phys., 98 (1993),pp. 5648-5652
    [33]
    C.Lee, W.Yang, R.G.Parr Phys. Rev. B, 37 (1988),pp. 785-789
    [34]
    J.O.Valderrama, K.Zarricueta Fluid Phase Equilibr., 275 (2009),pp. 145-151
    [35]
    R.L.Gardas, J.A.P.Coutinho Ind. Eng. Chem. Res., 47 (2008),pp. 5751-5757
    [36]
    R.F.StrigleJr
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (78) PDF downloads(15) Cited by()
    Proportional views

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return